|
MCQs: Which status flag in x86 family is used to enable or disable the interrupt especially when the Pentium processor operates in the virtual mode?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which control register in x86 family is reserved for future use and generally not adopted for current implementation?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which functional unit of ARM family architecture is responsible for upgrading the address register contents before the core reads or writes the next register value from memory location?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which type of non-privileged processor mode is entered due to raising of high priority of an interrupt?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Abort mode generally enters when _______
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In the process of pipelining, which instructions are fetched from the memory by the ARM processor during the execution of current instruction?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: If the three stages of execution in pipelining are overlapped, how would be the speed of execution?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which parameter/s is/are included in 'Time to market' design metric of an embedded system?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: How is the nature of instruction size in CISC processors?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: What is/are the configuration status of control unit in RISC Processors?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: At an active HIGH reset pin of 8051 microcontroller, for how many machine cycles should the positive going pulse be provided, if the power is switched ON?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: While designing an embedded system, which sub-task oriented process allocates the time steps for various modules that share the similar resources?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In DAC 0808, which among the following is configured as a reference in addition to R-2R ladder and current switches?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In DAC 0808, what is the high speed multiplying input slew rate?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In LPC 2148, which among the following is/are the functions of Mask register?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: What is the size range of the alphanumeric LCDs?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which type of handshake packet indicates that the device is incapable of accepting data as it is supposed to be busy with some another task?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: Which mode of operation is exhibited by RS-485 standard?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In Von Neumann architecture, which among the following handles all the operations of the system that are inside and outside the processor?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
|
MCQs: In CPU structure, where is one of the operand provided by an accumulator in order to store the result?
Category: Electronic Engineering Questions, Published by: T-Code Scripts
|
