MCQs: A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is____________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A part of the slab may be considered as the flange of the Tbeam if__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: per unit run exerted by the Total pressure on the vertical face of a retaining wall of height retained earth weighing per unit volume, is___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The live load to be considered for an accessible roof, is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: On an absolutely rigid foundation base, the pressure will________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The diameter of transverse reinforcement of columns should be equal to onefourth of the diameter of the main steel rods but not less than________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is____________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the shear stress in a R.C.C. beam is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The ratio of the breadth to effective depth of a beam is kept_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: In a cantilever retaining wall without a heel slab______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: In a singly reinforced beam____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A Tbeam behaves as a rectangular beam of a width equal to its flange if its neutral axis______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry onethird of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A ribbed slab is provided for______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The width of the rib of a Tbeam, is generally kept between_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts
