Process Control & Instrumentation Mcqs for Chemical

Q.  Thermodynamic Celsius scale of temperature measurement is________________?

a. Defined on the basis of melting point of ice and evaporation temperature of water vapor
b. Defined on the basis of melting point of ice and condensation temperature of water vapor
c. Having an interval of 100° between ice point to steam point
d. Both B. and C.


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Thermistors which have a very high temperature co-efficient of resistivity belong to the class of solid called________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  What is the Laplace transform of sin t ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Silver point temperature is ______________ °C?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A first order system with unity gain and time constant η is subjected to a sinusoidal input of frequency w = 1/η. The amplitude ratio for this system is______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Water is flowing through a series of four tanks and getting heated as shown in figure. It is desired to design a cascade control scheme for controlling the temperature of water leaving the tank 4 as there is a disturbance in the temperature of a second stream entering the tank 2. Select the best place to take the secondary measurement for the second loop?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not suitable for measuring the temperature of a red hot object in the range of 800 – 1600°C ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Pyrometry refers to the measurement of temperature_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Ordinary mercury in glass thermometer is used for measuring temperature upto 120°C. However, for measuring higher temperature upto __________ °C, thermometer is made by filling nitrogen under pressure above the mercury, which stops the evaporation of mercury and reduces the chance of broken thread of mercury?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to Bode stability criterion, a system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at frequency for which phase lag is_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Mcleod gauge measures the _____________ pressure?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Continuous measurement of moisture content of paper in paper industry is done by measuring the_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Liquid column manometers are used for measuring the pressure ______________ kgf/cm2?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which is the strongest paramagnetic gas ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Maximum differential pressure in liquid manometer is ______________ psi?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following instruments is not used for measuring sub-zero (<0°) temperatures ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following cannot measure a temperature of 1600°C ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a second order under damped system, the_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  “A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency.” This is _______________ criterion?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A typical example of a physical system with under damped characteristic is a____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a closed loop system, the process to be controlled is an integrating process with transfer function 1/2s. The controller proposed to be used in an integral controller with transfer function 1/T1s. When a step change in set point is applied to such a closed loop system, the controlled variable will exhibit__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts