|
MCQs: On a single lane road with two way traffic, the minimum stopping sight distance is equal to______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The shoulder provided along the road edge should be_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: When the path travelled along the road surface is more than the circumferential movement of the wheels due to rotation, then it results in______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For water bound macadam roads in localities of heavy rainfall, the recommended value of camber is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The sequence of four stages of survey in a highway alignment is______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Nagpur road plan formula were prepared by assuming______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Compared to a level surface, on a descending gradient the stopping sight distance is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The desirable length of overtaking zone as per IRC recommendation is equal to________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Select the correct statement______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Reaction time of a driver_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If the stopping distance is 60 meters, then the minimum stopping sight distance for two lane, two way traffic is_________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If b is the wheel track of a vehicle and h is the height of centre of gravity above road surface, then to avoid overturning and lateral skidding on a horizontal curve, the centrifugal ratio should always be________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The ruling design speed on a National Highway in plain terrain as per IRC recommendations is_____________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The effect of grade on safe overtaking sight distance is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Stopping sight distance is always_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The terrain may be classified as rolling terrain if the cross slope of land is______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For the design of super elevation for mixed traffic conditions, the speed is reduced by_____________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For a constant value of coefficient of lateral friction, the value of required super-elevation increases with_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: As per IRC recommendations, the maximum limit of super elevation for mixed traffic in plain terrain is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: On a horizontal curve if the pavement is kept horizontal across the alignment, then the pressure on the outer wheels will be_________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
