Mechanical Operations Mcqs for Chemical

Q.  The porosity of a compressible cake is _____________________?

a. Minimum at the filter medium
b. Minimum at the upstream face
c. Maximum at the filter medium
d. Same throughout the thickness of cake


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  The ratio of the area of openings in one screen (Taylor series) to that of the openings in the next smaller screen is_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not a cutting machine ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The sphericity of a cylinder of 1 mm diameter and length 3 mm is_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Separation of materials into products based on the difference of their sizes is called___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Ultra centrifuges are used for the separation of _____________ solid particles?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a _____________ operation?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Run of mine (ROM) coal is crushed by a _________________________ for use in domestic ovens?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  ____________ conveyor is the most suitable for long distance transportation of cold, nonabrasive granular/irregular shape/fine materials?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  ____________ mills fall in the category of tumbling mills ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of ____________ mm?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately _____________ microns?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not categorised as a “mechanical operation”?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Grinding characteristic of a material is given by its___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Ball mills and tube mills with flint or porcelain balls are used for size reduction of_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Gravity settling process is not involved in the working of a________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With increase in drum speed, in a rotary drum filter, the filtration rate_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Mixing of plastic solids is generally facilitated by___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The main size reduction operation in ultrafine grinders is_____________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not used as a filter medium in case of corrosive liquids?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts