RCC Structures Design Mcqs

Q.  The percentage of minimum reinforcement of the gross sectional area in slabs, is________________?

a. 0.10 %
b. 0.12 %
c. 0.15 %
d. 0.18 %


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  If the size of a column is reduced above the floor, the main bars of the columns, are_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The minimum number of main steel bars provided in R.C.C________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If T and R are tread and rise respectively of a stair, then_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a singly reinforced beam, the effective depth is measured from its compression edge to_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  On piles, the drop must be at least_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a pre-stressed beam carrying an external load W with a bent tendon is having angle of -stressed load P. The net downward load at the centre is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The diameter of longitudinal bars of a column should never be less than_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Steel beam theory is used for_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Post tensioning system_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A foundation is called shallow if its depth, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A flat slab is supported_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A pre-stressed concrete member__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  [A + (m – 1)ASC] known as equivalent concrete area of R.C.C. is given by______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum ratio of span to depth of a cantilever slab, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  carrying a uniformly distributed load per metre length is suspended at the A pile of length centre and from other two points 0.15 L from either end ; the maximum hogging moment will be_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts