Irrigation, Water Resources Engineering & Hydrology Mcqs

Q.  The main function of a divide wall is to_______________?

a. control the silt entry in the canal
b. prevent river floods from entering the canal
c. separate the undersluices from weir proper
d. provide smooth flow at sufficiently low velocity


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A hyetograph is a graphical representation of___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum average depth due to one day storm over an area of 100 km2 is 100 mm. Depth-Area-Duration (DAD. curves indicate that for the same area of 100 km2 the maximum average depth for a 3 hour storm will be__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The most suitable chemical which can be applied to the water surface for reducing evaporation is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A 6 hours storm had 4 cm of rainfall and the resulting runoff was 2 cm. If
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stage of river carrying a discharge of Q m7sec at a point is 10 m and slope of water surface is (1/4000). The discharge of a flood at the same point and same stage of 10 m with a water surface slope of(l/1000) will be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The flow-mass curve is graphical representation of__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The shape of recession limb of a hydrograph depends upon________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a catchment area of 120 km2, the equilibrium discharge in m3/hour of an S-curve obtained by the summation of 6 hour unit hydro graph is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The peak of a 4 hour flood hydrograph is 240 m3/sec . If the rainfall excess is 80 mm and base flow which is constant is 40 m3/sec, then the peak of 4-hours unit hydrograph will be__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For an annual flood series arranged in descending order of magnitude, the return for a magnitude listed at position period m in a total data N is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A unit hydro graph has one unit of_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the risk of a flood occurring in the next 10 years is accepted to 10%, then the return period for design should be__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the demand line drawn from a ridge in a flow mass curve does not intersect the curve again, it indicates that______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stream which does not have any base flow contribution is called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following methods is used to estimate flood discharge based on high water marks left over in the past ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum rainfall depth of 300 mm in 24 hours has a return period of 100 years. The probability of 24 hours rainfall equal to or greater than 300 mm occurring at least once in 10 years is given by_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A hydroelectric scheme operating under a head of 80 m will be classified as_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The net head under which the turbine reaches its peak efficiency at synchronous speed is called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The net speed under which the turbine reaches its peak efficiency is called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts