RCC Structures Design Mcqs

Q.  The effective span of a simply supported slab, is_______________?

a. Distance between the centres of the bearings
b. Clear distance between the inner faces of the walls plus twice the thickness of the wall
c. Clear span plus effective depth of the slab
d. None of these


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  In a combined footing if shear stress does not exceed 5 kg/cm2, the nominal stirrups provided are________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum shear stress (q) in concrete of a reinforced cement concrete beam is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An R.C.C. column is treated as long if its slenderness ratio is greater than____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The thickness of base slab of a retaining wall generally provided, is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance from either end where, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Distribution of shear intensity over a rectangular section of a beam, follows_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Design of R.C.C. simply supported beams carrying U.D.L. is based on the resultant B.M. at________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Design of R.C.C. cantilever beams, is based on the resultant force at______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Distribution reinforcement in a simply supported slab, is provided to distribute_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the size of a column is reduced above the floor, the main bars of the columns, are_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The minimum number of main steel bars provided in R.C.C________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If T and R are tread and rise respectively of a stair, then_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a singly reinforced beam, the effective depth is measured from its compression edge to_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  On piles, the drop must be at least_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a pre-stressed beam carrying an external load W with a bent tendon is having angle of -stressed load P. The net downward load at the centre is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The diameter of longitudinal bars of a column should never be less than_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts