|
MCQs: The factor of safety for______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The fineness modulus of fine aggregate is in the range of______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The compressive strength of 100 mm cube as compared to 150 mm cube is always_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If a beam fails in bond, then its bond strength can be increased most economi-cally by___________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If the depth of actual neutral axis in a beam is more than the depth of critical neutral axis, then the beam is called________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If the permissible stress in steel in tension is 140 N/mm2, then the depth of neutral axis for a singly reinforced rectangular balanced section will be___________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Minimum grade of concrete to be used in reinforced concrete as per IS:456-1978 is_____________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For concreting of heavily reinforced sections without vibration, the workability of concrete expressed as compacting factor should be________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: In case of hand mixing of concrete, the extra cement to be added is__________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The individual variation between test strength of sample should not be more than______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For walls, columns and vertical faces of all structural members, the form work is generally removed after_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For walls, columns and vertical faces of all structural members, the form work is generally removed after______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: One of the criteria for the effecvve width of flange of T-beam is bf =—+ bw +6Df 6 In above formula, l0 signifies_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For a continuous slab of 3 m x 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is__________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For a cantilever of effective depth of 0.5m, the maximum span to satisfy vertical deflection limit is______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Diagonal tension in a beam______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: According to IS : 456-1978, the cblumn or the strut is the member whose effective length is greater than________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For a simply supported beam of span 15m, the minimum effective depth to satisfy the vertical deflection limits should be________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: According to IS : 456- 1978, minimum slenderness ratio for a short column is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
