MCQs: If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The radius of a bar bend to form a hook, should not be less than_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A circular slab subjected to external loading, deflects to form a_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If a rectangular prestressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The number of treads in a flight is equal to_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The shear reinforcement in R.C.C. is provided to resist__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The amount of reinforcement for main bars in a slab, is based upon___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The minimum cube strength of concrete used for a prestressed member, is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If Sb, is the average bond stress on a bar of diameter subjected to maximum stress , the length of the embedment is given by_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: bending moment of a simply supported slab is M Kg.cm, the effective depth of the If the maximum slab is (where Q is M.R. factor)________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The width of the flange of a Tbeam, which may be considered to act effectively with the rib depends upon____________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Pick up the true statement from the following?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Pick up the correct statement from the following_?
Category: Civil Engineering Mcqs, Published by: TCode Scripts
