Irrigation, Water Resources Engineering & Hydrology Mcqs

Q.  Silt excluders are constructed on the________________?

a. river bed upstream of head regulator
b. river bed downstream of head regulator
c. canal bed upstream of head regulator
d. canal bed downstream of head regulator


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  The best unit duration of storm for a unit hydrograph is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The rainfall on five successive days were measured as 100 mm, 80 mm, 60 mm, 40 mm and 20 mm respectively. If the infiltration index or the storm loss rate for the catchment area is earlier estimated as 50 mm/day, the total surface run off will be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A current meter is used to measure the__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The runoff increases with________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  When surface of transpiration is submerged under water, then potential evapotranspiration is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Under the same conditions, which of the following shapes of water surface will give the highest rate of evaporation ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A raingauge should preferably be fixed________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Cyclonic precipitation is caused by lifting of an air mass due to________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Infiltration is the_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The depth of water required to bring the soil moisture content of a given soil upto its field capacity is called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Hydrograph is the graphical representation of________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The amount of irrigation water required to meet the evapotranspiration needs of the crop during its full growth is called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the quantity of water stored in the root zone of the crops to the quantity of water actually delivered in the field is known as__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following methods of applying water may be used on rolling land ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Optimum depth of kor watering for rice is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The kor depth for rice is 190 mm and kor period is 14 days. The outlet factor for this will be_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Rate of evaporation from a water surface increases if_________________? 1) difference of vapour pressure between water and air is increased 2) velocity of wind is decreased 3) concentration of soluble solids in water is decreased The correct answer is?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The forces, which are considered for the analysis of an elementary profile of a gravity dam under empty reservoir condition, are________________? 1) Water pressure 2) Self weight 3) Uplift 4) Pressure due to earthquake The correct answer is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Presence of tail water in a gravity dam_____________? 1) increases the principal stress 2) decreases the principal stress 3) increases the shear stress 4) decreases the shear stress The correct answer is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Variability of rainfall is____________? 1) largest in regions of high rainfall 2) largest in coastal areas 3) largest in regions of scanty rainfall The correct answer is?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts