Irrigation, Water Resources Engineering & Hydrology Mcqs

Q.  Select the incorrect statement ?

a. Intensive irrigation should be avoided in areas susceptible to water logging
b. Extensive irrigation should be adopted in areas susceptible to water logging
c. Lift irrigation increases water logging
d. all of the above


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Which of the following type of sea walls results in greatest protection of shore structures?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  When a wave strikes a vertical breakwater in deep water, it is reflected back and on meeting another advancing wave of similar amplitude merges and rises vertically in a wall of water. This phenomenon is called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The significant wave height is defined is the average height of the_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  By increasing the rise of lockgates_______________? (i) the length of the lock gate will increase (ii) transverse stress due to water pressure on the gate will increase (iii) compressive force on the gate will increase select the correct statements?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If H is the height of the wave expected, then the height of the breakwater is generally taken as______________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The difference in height between highest high water and lowest low water is called_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Select the incorrect statement ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a two lane channel, bottom width of channel is given by_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  As per Berlin’s formula, the length of wave in metres is given by_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In basins subjected to strong winds and tide, the length of the berthing area should not be less than____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Assertion A : Depth and width required at the entrance to a harbour are more than those required in the channel. Reason R : The entrance to a harbour is usually more exposed to waves as compared to the harbour itself__________________? Select your answer based on the coding system given below.
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum harbour depth below lowest low water is generally equal to_________________? (i) loaded draft + 1.2 m when bottom is rock (ii) loaded draft + 1.8 m when bottom is soft (iii) loaded draft + 1.2 m when bottom is soft (iv) loaded draft + 1.8 m when bottom is rock select the correct the correct statements.
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Dead weight tonnage of a ship_______________? i) varies with latitude and season ii) is more than displacement tonnage iii) is the difference between displacement load and displacement light select the correct statemens.
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Consider the following statements in regard to Beaufort scale for wind speeds______________? (i) The Beaufort number ranges from 1 to 12. (ii) Higher Beaufort number indicates higher speed of wind, (iii) Beaufort number for calm is smallest and for hurricane is highest select the correct statments.
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Assertion A : Basin walls have to be of much grater height than dock walls. Reason R : Tidal basins are subject to fluctuations of levels due to tidal variations? Select your answer based on the coding system given below.
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If Hs is the significant wave height, then the average wave height and highest wave height respectively are given by_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Consider the following statements? (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, (iii) Pier head is a structure constructed near the tip of a break water near the harbour entrance. select the correct statements?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The engine failure case for determining the basic runway length may require________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts