Surveying Mcqs

Q.  Select the correct statement_______________?

a. A contour is not necessarily a closed curve
b. A contour represents a ridge line if the concave side of lower value con¬tour lies towards the higher value contour
c. Two contours of different elevations do not cross each other except in case of an overhanging cliff
d. All of the above statements are correct


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Transit rule of adjusting the consecutive coordinates of a traverse is used where________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Horizontal distances obtained by thermometric observations_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The number of horizontal cross wires in a stadia diaphragm is ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a tacheometer the additive and multi-plying constants are respectively________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Different grades are joined together by a ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Overturning of vehicles on a curve can be avoided by using ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Subtense bar is an instrument used for _______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle between the prolongation of the preceding line and the forward line of a traverse is called ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  After fixing the plane table to the tripod, the main operations which are needed at each plane table station are ______________ ? 1. levelling 2. orientation 3. centering The correct sequence of these operations is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The methods used for locating the plane table stations are_______________? 1. radiation 2. traversing 3.intersection 4. resection The correct answer is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In the cross-section method of indirect contouring, the spacing of cross-sections depends upon_____________? 1. contour interval 2. scale of plan 3. characteristics of ground The correct answer is ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A metallic tape is made of ______________ ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The shape of the camber, best suited for cement concrete pavements, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stopping sight distance depends upon_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coefficient of friction is less when the pavement surface is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Camber in the road is provided for_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  On a single lane road with two way traffic, the minimum stopping sight distance is equal to______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts