|
MCQs: Unit of runoff in M.K.S. system is________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The area between the isohyets 45 cm and 55 cm is 100 square km and between 55 cm and 65 cm is 150 square km. The average depth of annua! precipitation over the above basin of 250 square km will be__________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: If it rains between 2 P.M. and 3 P.M. and the entire basin area just starts contributing water at 3 P.M. to the outlet, then time of concentration will be_____________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The normal annual precipitation at stations X, A, B and C are 700 mm, 1000 mm, 900 mm and 800 mm respectively. If the storm precipitation at three station A, B and C were 100 mm, 90 mm and 80 mm respectively, then the storm precipitation for station X will be___________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The unit hydrograph due to a storm may be obtained by dividing the ordinates of the direct runoff hydrograph by_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: S-hydrograph is used to obtain unit hydrograph of________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Dimensions of coefficient of transmissibility are______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: An artesian aquifer is the one where______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: A multipurpose reservoir is the one which is_________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The water stored in the reservoir below the minimum pool level is called_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Trap efficiency of a reservoir is a function of_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: When the upstream face of a gravity dam is vertical, then the intensity of water pressure at the water surface and at the base respectively will be_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The uplift pressure on the face of a drainage gallery in a dam is taken as_________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Hydrodynamic pressure due to earthquake acts at a height of_________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: When the reservoir is full, the maximum compressive force in a gravity dam is produced______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: For wave action in dams, the maximum height of freeboard is generally taken to be equal to_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: The most suitable material for the central impervious core of a zoned embankment type dam is_______________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Seepage through foundation in an earthen dam is controlled by providing___________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: Which of the following spillways is least suitable for an earthen dam ?
Category: Civil Engineering Mcqs, Published by: teswesm
|
|
MCQs: In a chute spillway, the flow is usually____________________?
Category: Civil Engineering Mcqs, Published by: teswesm
|
