Theory of Structures Mcqs

Q.  Pick up the correct statement from the following__________.?

a. For channels, the shear centre does not coincide its centroid
b. The point of intersection of the bending axis with the cross section of the beam, is called shear centre
c. For I sections, the shear centre coincides with the centroid of the cross section of the beam
d. All the above


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Stress may be expressed in Newtons___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The vertical reaction for the arch is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Flat spiral springs_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In case of a simply supported rectangular beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stiffness of the close coil helical spring is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of shear stress and shear strain of an elastic material, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  At yield point of a test piece, the material__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of moments of inertia of a triangular section about its base and about a centroidal axis parallel to its base, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and 2/3rd of the span, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In plastic analysis, the shape factor for a circular section, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For beams of uniform strength, if depth is constant______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The equivalent length of a column of length L, having both the ends hinged, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Stress may be defined as_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For permissible shear stress fs, the torque transmitted by a thin tube of mean diameter D and wall thickness t, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A three hinged arch is generally hinged at its supports and__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A truss containing j joints and m members, will be a simple truss if_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The locus of reaction of a two hinged semi-circular arch, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts