Thermodynamics for Chemical Mcqs


Q.  Pick out the wrong statement ?


a. At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature
b. Normally, the gases which are easily liquefied are more soluble in common solvents
c. The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents
d. At constant pressure, solubility of a gas in a liquid increases with rise in temperature


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  A change in state involving a decrease in entropy can be spontaneous, only if ____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Specific _____________ does not change during phase change at constant temperature and pressure?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  High _____________ is an undesirable property for a good refrigerant?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following liquid metals has the highest thermal conductivity ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  If heat contents of CH4, C2H4 and C3H8 are -17.9, 12.5 and -24.8 kcal/mole respectively, than ΔH for the reaction CH4(g) + C2H4(g) ⇌ C3H8(g) will be _____________ Kcal?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is_______________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The expression, ΔG = nRT. ln(P2/P1), gives the free energy change______________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  For any system, what is the minimum number of degrees of freedom ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  At the critical point of a substance____________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The number of degrees of freedom for an azeotropic mixture in a two component vapourliquid equilibria is/are__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The freezing point of a liquid decreases when the pressure is increased, if the liquid ____________ while freezing?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The compressibility factor of a gas is given by (where, V1 = actual volume of the gas V2 = gas volume predicted by ideal gas law)____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K___________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  In any spontaneous process, the ______________ free energy decreases ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  What is the value of Joule-Thomson co-efficient for an ideal gas ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  If atmospheric temperature and dew point are nearly equal, then the relative humidity is_______________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  No work is done by the system, when a reaction occurs at constant__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Joule-Thomson Co-efficient at any point on the inversion curve is___________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm