MCQs: LPG stands for ____________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than ________________ mg/kg of kerosene?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Catalyst used in isomerisation process is __________________ ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Octane number of n-heptane is assumed to be_________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: The conductivity of crude oil-water mixture depends on the__________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Cracking is___________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Catalyst used in alkylation process is__________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Good quality kerosene should have__________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Which of the following fractions of petroleum contains maximum sulphur ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: 1 centistoke is equal to ______________ Redwood I seconds?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Higher vapour pressure of gasoline indicates _________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Which parameter is used for the grading of paraffin waxes ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Which of the following is the easiest to crack ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Clay treatment is used to remove ___________________ ?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: _____________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Gasoline extracted from natural gas (by compression and cooling) is called the ___________ gasoline?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Catalyst used in the catalytic polymerisation is__________________?
Category: Chemical Engineering Mcqs, Published by: teswesm
|
MCQs: Crude topping column operates at ________________ pressure?
Category: Chemical Engineering Mcqs, Published by: teswesm
|