Process Equipment & Plant Design Mcqs for Chemical

Engineering MCQs CBSE MCQs

Q.  Pick out the wrong statement about the design of a sieve plate column ?

a. An increased weir height improves the tray efficiency at the cost of high plate pressure drop; optimum wear height being 40-90 mm for column pressure
b. For segmental downcomers, the chord length is 60-80% of the column diameter. An initial value of downcomer area of 12% is taken in the design
c. Width of the calming section provided at the inlet and outlet sides of the plate is 75 mm for column diameter below 1.5 metres and 100 mm for larger d
d. Minimum recommended downcomer residence time for the disengagement of entrained vapour is the same for both foaming and non-foaming liquids, which is


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Spalling of a refractory means its____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The linear thermal expansion of _______________ bricks upto 1000 °C is very low of the order of ≤ 0.5 percent?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Chrome magnesite is not used in the ____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  ______________ bricks are used in the burning zone of a cement rotary kiln ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Maximum water percentage in refractory mix meant for hand moulding may be as high as _____________ percent?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following has the lowest electrical resistivity ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Refractory castables are used for__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Silicon carbide refractories have very low ___________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Carbon refractories are exclusively used in the_________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Because of its very high refractoriness of the order of __________ °C, silicon carbide refractories are used in zinc smelting furnace, muffle furnace and for supporting the wares in tunnel kilns ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Which is the most stable crystalline form of silica at room temperature ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following bricks has the most close values of RUL and PCE ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Roof of a basic open hearth furnace is lined with ______________ bricks?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Chrome magnesite bricks are used in the_________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Refractory materials are never used in the construction of _________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Graphite or carbon refractories______________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Zirconia refractory_________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Carbon refractories have very high __________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  An ideal refractory should have high__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Fusion point of an acidic refractory material is________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm

Related Questions

▲