Chemical Engineering Basics Mcqs

Q.  Pick out the wrong statement about coating/electroplating of metals ?

a. Phosphate coating is used as an excellent base for paints & enamels
b. Phosphate coating is less corrosion resistant than chromate coating
c. The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode
d. Calorising is the process of coating steel with chromium


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Velocity of a gas in sound is not proportional to (where, T = Absolute temperature of the gas. P = Absolute pressure of the gas. y = Ratio of specific heats (Cp/Cv) ρ = specific weight of the gas) ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A form of stress corrosion failure termed as ‘season cracking’ is generally observed in __________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Unbreakable crockeries are made from ______________ polymers?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coarse grained steels have____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Production of a hollow product by inflation of a tube or parison is called the _______________ process?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  ______________ cannot increase the fatigue strength of a material?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Removal of non-condensable from steam or other vapour is termed as the ________________ process?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Maximum change in the hardness of martensite occurs in the carbon content range of _____________ percent in steel?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Speed of a submarine in deep sea & that of an aeroplane is measured by a/an___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The main charge in blast furnace is usually___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Identify the correct statement with reference to the extractive metallurgy of aluminium ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Calorific value of ____________________ are almost same?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  _______________ is not a case hardening process ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The atmospheric temperature during melting of ice/snow (in the atmosphere)_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Silicon percentage in acid resistant cast iron is about ___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Thermal equivalent of electrical power in practical calculation is _______________ kcal/kWh ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  One of the methods of purification of leach liquor is ion exchange, which involves_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The unit of gc is ___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Notched bar test is used for testing the _________________ of a material?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts