Soil Mechanics & Foundation Engineering Mcqs

Q.  Physical properties of a permeant which influence permeability are________________?

a. viscosity only
b. unit weight only
c. both viscosity and unit weight
d. none of the above


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Which one of the following clays behaves like a dense sand ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Clay layer A with single drainage and coefficient of consolidation Cv takes 6 months to achieve 50% consolidation. The time taken by clay layer B of the same thickness with double drainage and coefficient of consolidation Cv/2 to achieve the same degree of consolidation is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Compressibility of sandy soils is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coefficient of compressibility is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coarse grained soils are best compacted by a_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum dry density upto which any soil can be compacted depends upon____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ultimate consolidation settlement of a soil is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m2 to 200 kN/ m2. If the effective stress is further increased from 200 kN/ m2 to 400 kN/ m2, then the settlement of the same clay is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ultimate consolidation settlement of a structure resting on a soil_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Direct measurement of permeability of the specimen at any stage of loading can be made_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With the increase in the amount of compaction energy________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a loose sand sample and a dense sand sample consolidated to the same effective stress_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The shear strength of a soil_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Skempton’s pore pressure coefficient B for saturated soil is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a deposit of normally consolidated clay_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Unconfmed compressive strength test is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Shear strength of a soil is a unique function of__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m2 when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively______________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts