RCC Structures Design Mcqs


Q.  per unit run exerted by the Total pressure on the vertical face of a retaining wall of height retained earth weighing per unit volume, is___________________?

a. wh [(1 – )/(1 + sin )]
b. wh² [(1 – )/(1 + sin )]
c. wh² [(1 – )/2(1 + sin )]
d. wh² [(1 – )/3(1 + sin )]


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  If the depth of actual neutral axis of a doubly reinforced beam______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The maximum diameter of a bar used in a ribbed slab, is______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The breadth of a ribbed slab containing two bars must be between______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is_____________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  According to the steel beam theory of doubly reinforced beams______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is_______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is__________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The diameter of main bars in R.C.C. columns, shall not be less than________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Based on punching shear consideration, the overall depth of a combined footing under a column A, is_______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  In a combined footing if shear stress exceeds 5 kg/cm2, the nominal stirrups provided are______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The weight of reinforced concrete, is generally taken as______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  A retaining wall and is the horizontal earth pressure, the factor of safety If is weight of against sliding, is_____________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  In a beam the local bond stress Sb, is equal to_______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  With usual notations the depth of the neutral axis of a balanced section, is given by______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
Category: Civil Engineering Mcqs,   Published by: teswesm