Design of Concrete Structures Mcqs

Q.  Modulus of rupture of concrete is a measure of_______________?

a. flexural tensile strength
b. direct tensile strength
c. compressive strength
d. split tensile strength


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  For a continuous slab of 3 m x 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a cantilever of effective depth of 0.5m, the maximum span to satisfy vertical deflection limit is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Diagonal tension in a beam______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to IS : 456-1978, the cblumn or the strut is the member whose effective length is greater than________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a simply supported beam of span 15m, the minimum effective depth to satisfy the vertical deflection limits should be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to IS : 456- 1978, minimum slenderness ratio for a short column is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The minimum cover in a slab should neither be less than the diameter of bar nor less than_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the diameter of reinforcing bars and the slab thickness is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Lap length in compression shall not be less than______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to IS : 456-1978, the fiexural strength of concrete is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to IS: 456-1978, the maximum reinforcement in a column is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Minimum pitch of transverse reinforcement in a column is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D. is less than__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Minimum thickness of load bearing RCC wall should be_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In reinforced concrete footing on soil, the minimum thickness at edge should not be less than______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The slab is designed as one way if the ratio of long span to short span is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the storey height is equal to length of RCC wall, the percentage increase in strength is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Critical section for shear in case of flat slabs is at a distance of_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts