RCC Structures Design Mcqs

Q.  is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?

a. f = (P/A) + (Z/M)
b. f = (A/P) + (M/Z)
c. f = (P/A) + (M/Z)
d. f = (P/A) + (M/6Z)


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An under-reinforced section means_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a doubly-reinforced beam if and the effective depth and is depth of critical neutral axis, the following relationship holds good______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A raft foundation is provided if its area exceeds the plan area of the building by______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The effective span of a simply supported slab, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  intensity of pressure at a depth h on a block of earth weighing w per unit If p1 is the vertical______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to I.S. 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the permissible compressive stress for a concrete in bending is C kg/m2, the modular ratio is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Cantilever retaining walls can safely be used for a height not more than_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum area of tension reinforcement in beams shall not exceed_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The width of the flange of a T-beam should be less than_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts