Soil Mechanics & Foundation Engineering Mcqs

Q.  In hydrometer analysis for a soil mass______________?

a. both meniscus correction and dispersing agent correction are additive
b. both meniscus correction and dispersing agent correction are subtractive
c. meniscus correction is additive and dispersing agent correction is subtractive
d. meniscus correction is subtractive and dispersing agent correction is additive


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Quick sand is a________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Rise of water table above the ground surface causes________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Highway Research Board (HRB) classification of soils is based on__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the water table rises upto ground surface, then the___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  According to IS classification, the range of silt size particles is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Physical properties of a permeant which influence permeability are________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Effective stress on soil_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the permeability of a soil is 0.8 mm/sec, the type of soil is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following methods is best suited for determination of permeability of coarse-grained soils ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Effective stress is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coefficient of permeability of soil______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following methods is more suitable for the determination of permeability of clayey soil ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The total discharge from two wells situated near to each other is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Total number of stress components at a point within a soil mass loaded at its boundary is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The flownet for an earthen dam with 30 m water depth consists of 25 potential drops and 5 flow channels. The coefficient of permeability of dam material is 0.03 mm/sec. The discharge per meter length of dam is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The slope of isochrone at any point at a given time indicates the rate of change of_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The value of compression index for a remoulded sample whose liquid limit is 50% is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts