RCC Structures Design Mcqs

Q.  In a singly reinforced beam____________?

a. Compression is borne entirely by concrete
b. Steel possesses initial stresses when embedded in concrete
c. Plane sections transverse to the centre line of the beam before bending remain plane after bending
d. Elastic moduli for concrete and steel have different values within the limits of deformation of the beam


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Based on punching shear consideration, the overall depth of a combined footing under a column A, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a combined footing if shear stress exceeds 5 kg/cm2, the nominal stirrups provided are______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The weight of reinforced concrete, is generally taken as______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A retaining wall and is the horizontal earth pressure, the factor of safety If is weight of against sliding, is_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a beam the local bond stress Sb, is equal to_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With usual notations the depth of the neutral axis of a balanced section, is given by______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An under-reinforced section means_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a doubly-reinforced beam if and the effective depth and is depth of critical neutral axis, the following relationship holds good______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A raft foundation is provided if its area exceeds the plan area of the building by______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The effective span of a simply supported slab, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  intensity of pressure at a depth h on a block of earth weighing w per unit If p1 is the vertical______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts