Process Control & Instrumentation Mcqs for Chemical

Q.  In a shell and tube heat exchanger, the flow rate of heating/cooling fluid is the ______________ variable?

a. Load
b. Controlled
c. Manipulated
d. None of these


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Transfer function of transportation lag is___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An amplitude ratio of 0.1 corresponds to _____________ decibels?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Emf developed by a thermocouple while measuring a temperature of 400°C is 22 mV. The type of thermocouple used is ___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  What is the dynamic error in a critically damped second order instrument for a ramp input (At) ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the systems having the following transfer function is stable ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following fluid flow measuring devices can measure the largest flow rate ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The operation of a Rotameter is based on ________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The unit step response of the transfer function 1/(s2 + 2s + 3) _______________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Bode stability method uses ____________ loop transfer function?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For an input forcing function, X(t) = 2t2, the Laplace transform of this function is________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The deflection of the free end of the bimetallic strips in a bimetallic thermometer with temperature is nearly__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Thermal conductivity cell is the primary element of a/an _____________ analyser?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The temperature of tempering oil baths maintained at 400°C during heat treatment of steel is measured by a/an _____________ thermocouple?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not a mechanical pressure sensing element ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Working principle of bimetallic thermometers is difference in linear co-efficient of thermal expansion of two strips of different metals welded together. Which of the following has the maximum thermal co-efficient of linear expansion ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Emf developed by a thermocouple, while measuring a temperature of 600°C is about 5.5 mV. The type of thermocouple used is_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Pressure of 0.0001 absolute psi can be measured by _____________ gauge?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Thermal wells used in temperature measurements should have __________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The unit step response of the transfer function (2s – 1)/[(3s + 1) (4s + 1)] reaches its final steady state asymptotically after _____________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A proportional controller with a gain of Kc is used to control a first order process. The offset will increase, if________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts