MCQs: A runoff river plant is____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A runoff river plant_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A hyetograph is a graphical representation of___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The maximum average depth due to one day storm over an area of 100 km2 is 100 mm. DepthAreaDuration (DAD. curves indicate that for the same area of 100 km2 the maximum average depth for a 3 hour storm will be__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The most suitable chemical which can be applied to the water surface for reducing evaporation is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A 6 hours storm had 4 cm of rainfall and the resulting runoff was 2 cm. If Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The stage of river carrying a discharge of Q m7sec at a point is 10 m and slope of water surface is (1/4000). The discharge of a flood at the same point and same stage of 10 m with a water surface slope of(l/1000) will be________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The flowmass curve is graphical representation of__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The shape of recession limb of a hydrograph depends upon________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For a catchment area of 120 km2, the equilibrium discharge in m3/hour of an Scurve obtained by the summation of 6 hour unit hydro graph is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The peak of a 4 hour flood hydrograph is 240 m3/sec . If the rainfall excess is 80 mm and base flow which is constant is 40 m3/sec, then the peak of 4hours unit hydrograph will be__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For an annual flood series arranged in descending order of magnitude, the return for a magnitude listed at position period m in a total data N is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A unit hydro graph has one unit of_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the risk of a flood occurring in the next 10 years is accepted to 10%, then the return period for design should be__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the demand line drawn from a ridge in a flow mass curve does not intersect the curve again, it indicates that______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The stream which does not have any base flow contribution is called________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Which of the following methods is used to estimate flood discharge based on high water marks left over in the past ?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The maximum rainfall depth of 300 mm in 24 hours has a return period of 100 years. The probability of 24 hours rainfall equal to or greater than 300 mm occurring at least once in 10 years is given by_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: A hydroelectric scheme operating under a head of 80 m will be classified as_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts
