# RCC Structures Design Mcqs

Q.  If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be_______________?

a. Straight below centroidal axis
b. Parabolic with convexity downward
c. Parabolic with convexity upward
d. Straight above centroidal axis

ANSWER: See Answer

No explanation is available for this question!
 MCQs:  In a cantilever retaining wall without a heel slab______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  In a singly reinforced beam____________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  A ribbed slab is provided for______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  The width of the rib of a T-beam, is generally kept between_______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  If the depth of actual neutral axis of a doubly reinforced beam______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  The maximum diameter of a bar used in a ribbed slab, is______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds_________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  The breadth of a ribbed slab containing two bars must be between______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is_____________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  According to the steel beam theory of doubly reinforced beams______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is_______________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts MCQs:  In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed________________? Category: Civil Engineering Mcqs,   Published by: T-Code Scripts