Irrigation, Water Resources Engineering & Hydrology Mcqs


Q.  Hydrograph is the graphical representation of________________?

a. runoff and time
b. surface runoff and time
c. ground waterflow and time
d. rainfall and time


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Minimum width of ship clearance shall be__________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  As compared to wall type breakwater, mound type breakwater_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  If the maximum spring rise is 2 m and height of the waves expected is 4 m , then the breakwater height above the datum will be_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  In multiple point mooring system, vessel is secured to minimum of____________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following is a fixed type mooring accessory ?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area ?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Assertion A : Large size stones are required in stone revetment in shore protection. Reason R : Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone? Select your answer based on the coding system given below
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following structures protects the shore by trapping of littoral drift?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  For designing the dock, the proportion of ship load assumed to be borne by keel blocks is________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  A ship is berthed in a chamber and lifted by principles of buoyancy Such a chamber is called_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  A ship strikes the berth generally at an angle_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following conditions of loading imposes the greatest load on the foundation in case of dry docks?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following are repair docks ?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following type of sea walls results in greatest protection of shore structures?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  When a wave strikes a vertical breakwater in deep water, it is reflected back and on meeting another advancing wave of similar amplitude merges and rises vertically in a wall of water. This phenomenon is called_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The significant wave height is defined is the average height of the_________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  By increasing the rise of lockgates_______________? (i) the length of the lock gate will increase (ii) transverse stress due to water pressure on the gate will increase (iii) compressive force on the gate will increase select the correct statements?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  If H is the height of the wave expected, then the height of the breakwater is generally taken as______________________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  The difference in height between highest high water and lowest low water is called_______________?
Category: Civil Engineering Mcqs,   Published by: teswesm
MCQs:  Select the incorrect statement ?
Category: Civil Engineering Mcqs,   Published by: teswesm