Theory of Structures Mcqs

Q.  H V are the algebraic sums of the forces resolved horizontally and vertically respectively, M is the algebraic sum of the moments of forces about any point, for the equilibrium of the body acted upon____________________?

a. H = 0
b. V = 0
c. M = 0
d. All the above


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  To determine the force in BD of the truss shown in the given figure a section is passed through BD, CD and CE, and the moments are taken about________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm 2, the angle of twist in radians, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A compound truss may be formed by connecting two simple rigid frames, by_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of crippling loads of a column having both the ends fixed to the column having both the ends hinged, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For determining the force in the member AB of the truss shown in the given figure by method of sections, the section is made to pass through AB, AD and ED and the moments are taken about___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The degree of indeterminacy of the frame in the given figure, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A compound bar consists of two bars of equal length. Steel bar cross -section is 3500 mm2and that of brass bar is 3000 mm2. These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2, the stresses developed are___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The forces acting on the bar as shown in the given figure introduce________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The yield moment of a cross section is defined as the moment that will just produce the yield stress in_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A road of uniform cross-section A and length L force P. The Young’s Modulus E of the material, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The forces in the members of simple trusses, may be analysed by________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  P = / L² is the equation for Euler’s crippling load if_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the stresses produced by a suddenly applied load and by a gradually applied load on a bar, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Slenderness ratio of a long column, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The horizontal thrust on the ends of a two hinged semicircular arch of radius carrying_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A shaft subjected to a bending moment M and a torque T, experiences__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts