Refractory Technology Mcqs for Chemical

Q.  Grog addition in fireclay during brick manufacture is done to_________________?

a. Reduce its shrinkage on heating
b. Impart greater spalling resistance
c. Enhance the strength of fired refractories
d. All A., B. and C.


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Chrome magnesite brick is not used for lining the___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Most Cermets, which normally have high thermal conductivity and high thermal shock resistance, comprises of ceramic & metallic components of ______________ percent respectively?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  ____________ of carbon blocks in the hearth of blast furnace helps in avoiding skull formation, when it becomes cold?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Rotary kilns meant for calcination of limestone are lined with chrome magnesite in ______________ zone?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Semi-silica bricks compared to silica bricks have_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following impurities reduces the refractoriness of magnesite bricks ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  SiO2 percentage in firebrick is about____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  ‘Spinel’, a refractory mineral is chemically represented as____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With increase in the density of silica refractories, its_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Mixing of ground refractory material and water is done in a ______________ mill?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Silicon carbide refractories are used in the _____________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Firing temperature of magnesite bricks is about _____________ °C?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not an acidic refractory?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Grog__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Except _____________, all other refractories are bad conductors of electricity (i.e, have low electrical conductivity)?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Refractoriness of a typical silica brick corresponds to Segar cone number, ’32’, which is equivalent to a temperature of _____________ °C?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With increase in the alumina content in firebricks, its fusion point (refractoriness) ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Insulating refractories should have_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which is the stable form of silica below 870°C ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is not a neutral refractory ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts