Waste Water Engineering Mcqs

Q.  For sewers, inverted siphon is provided for___________________?

a. One pipe
b. Two pipes
c. Three pipes
d. Four pipes


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Ventilating shafts are provided to a sewer line at every__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Boussinesq’s equation for ascertaining unit pressure at a depth on sewers due to traffic loads, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the pH value of sewage is 7__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The normal values of over flow rates for secondary sedimentation tanks, ranges between__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is __________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For non-scouring velocity 5 m/sec, the type of sewers generally preferred to, is____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of maximum sewage flow to average sewage flow for trunk mains having diameters more than 1.25 m, is____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Large diameter sewers subjected to external pressure alone, are reinforced ______________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The liquid wastes from kitchens, bath rooms and wash basins, is not called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The detention time (t) of a settling tank, may be defined as the time required for_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The effluent of a septic tank is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The design period of sewage treatment works in normally_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In Chezy’s formula V = C rs for calculating the velocity of flow in circular sewer of diameter running full, the value of hydraulic mean radius is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The recommended detention period for grit chambers is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If is the diameter of upper circular portion, the overall depth of a standard egg shaped section, is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A rainfall may be classified as acidic if its pH value is less or equal to________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For house drainage minimum gradient is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A rain sanitary sewer is constructed to carry_________________ ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts