Railway Engineering Mcqs

Q.  Flat mild steel bearing plates are used_________________?

a. for points and crossings in the lead portion
b. with wooden sleepers at locations where creep is likely to be developed
c. on all joints and curves
d. on all the above


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  In a shunting signal if the red band is inclined at 45° it indicates_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A train is hauled by 4-8-2 locomotive. The number of driving wheels in this locomotive is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  On a single rail track, goods trains loaded with heavy iron material run starting from A to B and then empty wagons run from B to A. The amount of creep in the rails__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For laying the railway track, materials required are__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Metal sleepers are superior to wooden sleepers with respect to________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a 8° curve track diverging from a main curve of 5° in an opposite direction in the layout of a broad gauge yard, the cant to be provided for the branch track for maximum speed of 45 km/h on the main line and ‘G’ = 1.676 m is (Permitted cant deficiency for the main line = 7.6 cm)______________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Wear of rails is maximum in weight of___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A treadle bar is used for_____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  What will be the curve lead for a 1 in 8.5 turnout taking off from a straight broad gauge track?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The load on each axle of a locomotive is 22 tonnes. If the coefficient of friction is 0.2, then the hauling capacity due to 3 pairs of driving wheels will be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a sleeper density of (n+5), the number of sleepers required for constructing a broad gauge railway track of length 650 m is____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A train is hauled by 2-8-2 locomotive with 22.5 tonnes and on each driving axle. Assuming the coefficient of rail-wheel friction to be 0.25, what would be the hauling capacity of the locomotive?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Consider the following statements about concrete sleepers_________________? 1. They improve the track modulus. 2. They have good scrap value. 3. They render transportation easy. 4. They maintain the gauge quite satisfactorily.Of these statements
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which one of the following rail failures is caused by loose fish bolts at expansion joints ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following statements regarding ballast materials are correct ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For the purpose of track maintenance, the number of turn out equivalent to one track km are__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  When semaphore and warner are installed on the same post, then the stop indication is given when___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A triangle is used for__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The object of providing a point lock is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following mechanical devices is used to ensure that route cannot be changed while the train is on the point even after putting back the signal ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts