IC Engines Mcqs

Q.  Flash point of fuel oil is __________________?

a. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in cont
b. temperature at which it solidifies or congeals
c. temperature at which it catches fire without external aid
d. indicated by 90% distillation temperature, i.e. when 90% of sample oil has distilled off
e. none of the above


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  The pressure at the end of compression in the case of diesel engine is of the order of___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  If the compression ratio of an engine working on Otto cycle is increased from 5 to 7, the %age increase in efficiency will be________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The thermal efficiecny of a diesel cycle having fixed compression ratio, with increase in cut-off ratio will___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Combustion in compression ignition engines is____________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The temperature of interior surface of cylinder wall in normal operation is not allowed to exceed____________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Compression loss in I.C engines occurs due to_________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The specific fuel consumption per BHP hour for diesel engine is approximately___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The air requirement of a petrol engine during starting compared to theoretical airequired for complete combustion is___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Which of the following is not an interns combustion engine___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The output of a diesel engine can be increased without increasing the engine revolution or size in following way_________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  In a typical medium speed 4-stroke cycle diesel engine________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The precess of breaking up or a lipuid into fine droplets by spraying is called___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The accunmulation of carbon in a cylinder results in increase of________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  The air-fuel ratio of the petrol engine is controlled by__________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Diesel fuel, compared to petrol is_________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  When crude oil is heated, then which of the following hydrocarbon is given off first______________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  A 75 cc engine has following parameter as 75 cc ___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Gaseous-fuel guarantees are based on___________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  Polymerisation is a chemical process in which molecules of a compound become________________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts
MCQs:  In diesel engine, the compression ratio in comparison to expansion ratio is_______________?
Category: Mechanical Engineering Questions,   Published by: T-Code Scripts