Railway Engineering Mcqs

Q.  Flangeway clearance is the distance_________________?

a. between the adjoining faces of the running rail and the check rail near the crossing
b. between the gauge faces of the stock rail and the tongue rail
c. through which the tongue rail moves laterally at the toe of the switch
d. none of the above


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Sleeper density in India is normally kept as___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The type of bearing plate used in all joints and on curves to give better bearing area to the rails is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following types of sleepers is preferred on joints ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Staggered joints are generally provided__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Creep is the_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The formation width for a single line meter gauge track in embankment as adopted on Indian Railways is______________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The width of foot for 90 R rail section is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Fish plate is in contact with rail at________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The main function of a fish plate is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  60 R rails are mostly used in__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Tensile strength of steel used in rails should not be less than____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The cross-sectional area of 52 kg flat footed rail is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Largest percentage of material in the rail is in its__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The standard length of rail for Broad Gauge and Meter Gauge are respectively __________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The rail is designated by its__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Two important constituents in the com-position of steel used for rail are_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The following tests are conducted for rails _________________? i) falling weight test ii) tensile test iii) hammer test The compulsory tests are?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following factors govern the choice of the gauge ? i) volume and nature of traffic ii) speed of train iii) physical features of the country The correct answer is ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts