Refractory Technology Mcqs for Chemical

Q.  Fireclay bricks is not used for lining the__________________?

a. Cupola
b. Gas producer
c. Bottom of hot metal mixer
d. Roof of open hearth furnace


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Pure oxide refractories are generally monocrystalline in nature and are self bonded ______________ bricks are generally used as moderator in nuclear reactors?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Ceramic recuperators used for waste heat recovery from high temperature flue gas going out of the furnace is made of ________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Refractory bricks having lower porosity have _____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Silica bricks are never used for lining the_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Fireclay refractories___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Fireclay bricks is not used for lining the_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In panel test for spalling resistance, the average face temperature of panel assembly is maintained at _____________ °C for 24 hours?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which is a neutral refractory ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Magnesite refractories are generally not used in the__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Thermal conductivity of refractory bricks____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Fireclay bricks are not used in the_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Permeability of bricks is a measure of the___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Faster rate of drying of moulded refractories results in high ______________ of refractories?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Refractories used in/for ______________ should have low thermal conductivity?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Lower wall courses of soaking pits are made of _____________ bricks to avoid the action of molten slag & scale?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A vapor whose partial pressure is less than its equilibrium vapor pressure is called a ______________ vapor?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Applicability of Clausius-Clapeyron Equation is subject to the condition that the __________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The reaction A + B → C has been conducted in a reactor as shown below. The number of boundaries around which material balance can be written, are_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Methane is mixed with stoichiometric proportion of oxygen and completely combusted. The number of additional specifications required to determine the product flow rate and composition is_______________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Concentration of a solution expressed in terms of _______________ is independent of temperature?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts