Petroleum Refinery Engineering Mcqs for Chemical

Q.  Feed for reforming is generally___________________?

a. Naphtha or straight run gasoline
b. Reduced crude
c. Vacuum gas oil
d. Atmospheric gas oil


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  Aromatics have the highest ________________ of all the hydrocarbons of same carbon atoms?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is _______________ centistokes (or 100 Redwood I seconds) ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following factors does not govern the mechanism of petroleum formation from organic sources ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is desirable in petrol (gasoline) but undesirable in kerosene ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following is a non-regenerative fixed bed catalytic reforming process ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  With increase in the molecular weight of aromatic present in kerosene, its smoking tendency ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Platforming is a ____________ process?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Paraffins are desirable in lubricating oil, as it has got high_____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about ________________ mm Hg absolute?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Extractor temperature is maintained at -20°C in Edeleanu process to reduce the _________________ of kerosene?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with __________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The general formula of naphthenes is___________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Solvent used for dewaxing of petroleum products are____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C ?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An upper limit of oil content is limited to about ______________ percent for achieving efficient and satisfactory level of wax sweating?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Hydrogen percentage (by weight) in crude petroleum may be about __________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Catalyst used in catalytic polymerisation which produces polymer gasoline is_________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Flash point of an oil is determined by the _____________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Visbreaking__________________?
Category: Chemical Engineering Mcqs,   Published by: T-Code Scripts