Chemical Engineering Basics Mcqs


Q.  Damage to metal surface by mechanical action is called____________________?

a. Pitting
b. Corrosion
c. Erosion
d. None of these


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  ____________________ flux is used for the extraction of metal from its self fluxing ores?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Uniform ramming of sand in green sand moulding process leads to____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  At the point of boundary layer separation in fluid flow, the _____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  In case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  ________________ property of steel increases by addition of large amount of silicon in it?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  When the wavelength of incident X-rays increases, the angle of diffraction__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Liquid nitrogen containers can be made from ___________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  To counteract the bad effects of strain hardening on a cold formed part, it must be ______________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The thermodynamic law, PVy = constant, is not followed by the __________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Material of construction of foundry crucible is _________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  _______________ test determines the yield strength, Young’s modulus of elasticity, percentage reduction in area & percentage elongation of a material ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Bad odour in sanitary latrines is reduced by periodically sprinkling_____________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The minimum and the maximum number of members required to form a Private Limited Joint Stock Company are respectively __________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Which of the following metals reacts violently with water ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Steel is welded using the ________________ flame ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  ________________ is a special constituent of chlorophyll without which photosynthesis is not possible ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  The highest stress that a material can withstand for a specified length of time without excessive deformation is called the ____________ strength ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of _______________ gms of zinc per m2 of steel strip ?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Two wires of the same radius & material having length in the ratio of 1 : 2 are stretched by the same force. The strain produced in the two wires will be in the ratio of__________________?
Category: Chemical Engineering Mcqs,   Published by: teswesm
MCQs:  Force between the molecules of the same substance is called ______________________ force?
Category: Chemical Engineering Mcqs,   Published by: teswesm