MCQs: carrying a uniformly distributed load per metre length is suspended at two A pile of length points, the maximum, B.M. at the centre of the pile or at the points of suspension, is_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If is the uniformly distributed load on a circular slab of radius maximum positive radial moment at its centre, is__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For M 150 grade concrete (1:2:4) the moment of resistance factor is_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The spacing of transverse reinforcement of column is decided by the following consideration_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The selfweight of the footing, is_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: After prestressing process is completed, a loss of stress is due to______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If p1 and P2 are effective lateral loadings at the bottom and top exerted by a level earth subjected to a superload on the vertical face of height h of a retaining wall, the horizontal pressure p per unit length of the wall, is____________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The transverse reinforcements provided at right angles to the main reinforcement_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Long and short spans of a two way slab are l and l and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. Accordingy to xRankine Grashoff theory___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2, nominal reinforcement is provided at a pitch of________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: High strength concrete is used in prestressed member________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: on a circular slab of radius , the maximum radial moment at the centre of the If is the load slab, is WR²/16_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is__________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The modular ratio m of a concrete whose permissible compressive stress is C, may be obtained from the equation.
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Enlarged head of a supporting column of a flat slab is technically known as______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If A is the area of the foundation of a retaining wall carrying a load W and retaining earth of weight w per unit volume, the minimum depth (h) of the foundation from the free surface of the earth, is )/(1 + sin )]_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Thickened part of a flat slab over its supporting column, is technically known as_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts
