Hydraulics & Fluid Mechanics Mcqs

Q.  Choose the wrong statement__?

a. any weight, floating or immersed in a liquid, is acted upon by a buoyant force
b. Buoyant force is equal to the weight of the liquid displaced
c. The point through which buoyant force acts, is called the center of buoyancy
d. Center of buoyancy is located above the center of gravity of the displaced liquid v
e. Relative density of liquids can be determined by means of the depth of flotation of hydrometer


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  A 2 m long ladder rests against a wall and makes an angle of 30° with the horizontal floor. Where will be the instantaneous center of rotation when the ladder starts slipping ? 1) 1.0 in from the wall 2) 1.732 m from the wall 3) 1.0 m above the floor 4) 1.732 m above the floor The correct answer is?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle of projection at which the horizontal range and maximum height of a projectile are equal to_____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A stone is thrown vertically upwards with a vertical velocity of 49 m/sec. It returns to the ground in________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the direction of projection bisects the angle between the vertical and the inclined plane, then the range of projectile on the inclined plane is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle of projection at which the horizontal range and maximum height of a projectile are equal to___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a simple harmonic motion, the position of equilibrium is always_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The time period of a simple pendulum depends on__________________? 1) mass of suspended particle 2) length of the pendulum 3) acceleration due to gravity The correct answer is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum displacement of a particle executing S.H.M. corresponds to__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A simple pendulum of length 1 has an energy E when its amplitude is A. If its amplitude is increased to 2 A, the energy becomes____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of kinetic energy and potential energy of a simple harmonic oscillator, at a displacement equal to half its amplitude is given by__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Time period and length of a seconds pendulum respectively are_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A particle is executing simple harmonic motion in a line 1.0 m long. If the time of one complete vibration is 1 sec, then the maximum velocity of the particle is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Joule is the unit of__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A quantity whose dimensions are M2L2 T3 could be the product of_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If y is force and x is velocity, then dimensions of —=r are dx2__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The dimensions of centrifugal force are__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The unit of rotational inertia of a body in C.G.S system is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In SI units, the units of force and energy are respectively___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A cable loaded with 10 kN/m of span is stretched between supports in the same horizontal line 100 m apart. If the central dip is 10 m, then the maximum and minimum pull in the cable respectively are____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Impulse can be obtained from a_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts