Strength of Materials Mcqs

Q.  Center of percussion is______________?

a. the point of C.G.
b. the point of metacentre
c. the point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis
d. point of suspension
e. the point in a body about which it can rotate horizontally and oscillate under the influence of gravity


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  Critical path_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A father notes that when his teenage daughter uses the telephone, she takes not less than 6 minutes for a call and som? times as much as an hour. Fifteen minutes call are more frequent than calls of any other duration. If these phone calls were an activity in PERT project, then phone calls expected duration will be_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The time by which a particular activity can be delayed without affecting the preceding and succeeding activities is known as_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The reduction in project time normally results in_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The process of incorporating changes and rescheduling or replanning is called_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The normal time required for the completion of project in the above problem is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Updating may result in_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Interfering float is the difference between__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistence of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Which of the following excavators is most suitable for digging under water?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For which of the following materials, the output of power shovels for a fixed shovel size will be maximum_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Consider the following statements for a power shovel? (i) Output can be increased by reducing the angle of swing for a given depth of cut (ii) For a given angle of swing, output will be maximum at optimum depth of cut (iii) Output can be increased by keeping the depth of cut less than optimum depth (iv) Output can be increased by increasing the size of shovel select the correct statements?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A machine is purchased for Rs. 10,000,00/- and has an estimated life of 10 years. The salvage value at the end of 10 years is Rs. 1,50,000/-. The book value of the machine at the end of 5 years using general straight line method of evaluation of depreciation is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Rolling resistance of a wheel depends upon_____________? (i) Vehicle load (ii) Grade (iii) Ground select the correct statements?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the gross vehicle weight of a truck is 30 t and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels : 25000 kg Scraper wheels : 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An earth moving equipment costs Rs. 5,00,000/- and has an estimated life of 10 years and a salvage value of Rs. 50,000/-.What uniform annual amount must be set aside at the end of each of the 10 years for replacement if the interest rate is 8% per annum and if the sinking fund factor at 8% per annum interest rate for 10 years is 0.069 ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The probability of completion of any activity within its expected time is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts