RCC Structures Design Mcqs

Q.  Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than____________?

a. 42 diameters from the centre of the column
b. 42 diameters from the inner edge of the column
c. 42 diameters from the outer edge of the column
d. 24 diameters from the centre of the column


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  On an absolutely rigid foundation base, the pressure will________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is____________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the shear stress in a R.C.C. beam is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the breadth to effective depth of a beam is kept_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a cantilever retaining wall without a heel slab______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In a singly reinforced beam____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A ribbed slab is provided for______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The width of the rib of a T-beam, is generally kept between_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the depth of actual neutral axis of a doubly reinforced beam______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum diameter of a bar used in a ribbed slab, is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts