Surveying Mcqs

Q.  Benchmark is established by________________?

a. hypsometry
b. barometric levelling
c. spirit levelling
d. trigonometrical levelling


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Overturning of vehicles on a curve can be avoided by using ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Subtense bar is an instrument used for _______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The angle between the prolongation of the preceding line and the forward line of a traverse is called ________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  After fixing the plane table to the tripod, the main operations which are needed at each plane table station are ______________ ? 1. levelling 2. orientation 3. centering The correct sequence of these operations is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The methods used for locating the plane table stations are_______________? 1. radiation 2. traversing 3.intersection 4. resection The correct answer is
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  In the cross-section method of indirect contouring, the spacing of cross-sections depends upon_____________? 1. contour interval 2. scale of plan 3. characteristics of ground The correct answer is ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A metallic tape is made of ______________ ?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The shape of the camber, best suited for cement concrete pavements, is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stopping sight distance depends upon_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Coefficient of friction is less when the pavement surface is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Camber in the road is provided for_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  On a single lane road with two way traffic, the minimum stopping sight distance is equal to______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The shoulder provided along the road edge should be_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  When the path travelled along the road surface is more than the circumferential movement of the wheels due to rotation, then it results in______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For water bound macadam roads in localities of heavy rainfall, the recommended value of camber is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The sequence of four stages of survey in a highway alignment is______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Nagpur road plan formula were prepared by assuming______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Compared to a level surface, on a descending gradient the stopping sight distance is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts