MCQs: An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the permissible compressive stress for a concrete in bending is C kg/m2, the modular ratio is_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: Cantilever retaining walls can safely be used for a height not more than_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The maximum area of tension reinforcement in beams shall not exceed_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The width of the flange of a Tbeam should be less than_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is___________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The percentage of minimum reinforcement of the gross sectional area in slabs, is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The maximum shear stress (qmax) in a rectangular beam is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The length of the straight portion of a bar beyond the end of the hook, should be at least_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If diameter of a reinforcement bar is d, the anchorage value of the hook is_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: As per I.S. 456 – 1978, the pH value of water shall be_______________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: For M 150 mix concrete, according to I.S. specifications, local bond stress, is_________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: foundation is assumed as The weight of a_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than____________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: In a combined footing if shear stress does not exceed 5 kg/cm2, the nominal stirrups provided are________________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: The maximum shear stress (q) in concrete of a reinforced cement concrete beam is_____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts

MCQs: An R.C.C. column is treated as long if its slenderness ratio is greater than____________?
Category: Civil Engineering Mcqs, Published by: TCode Scripts
