Irrigation, Water Resources Engineering & Hydrology Mcqs

Q.  An artesian aquifer is the one where______________?

a. water surface under the ground is at atmospheric pressure
b. water is under pressure between two impervious strata
c. water table serves as upper surface of zone of saturation
d. none of the above


ANSWER: See Answer
 
No explanation is available for this question!
TasDia Network - Mcqs | Signature | Lyrics
MCQs:  In a Sarda type fall, rectangular crest is used for discharge upto______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A straight glacis type fall with a baffle platform and a baffle wall is called_____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Vertical drop fall is satisfactory for a height upto ___________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If the R.L’s of canal bed level and high flood level of drainage are 212.0 m and 210.0 m respectively, then cross drainage work will be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The meander pattern of a river is developed by_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  An aggrading river is a_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  River training for depth is achieved by_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If D is the depth of scour below original bed, then the width of launching apron is generally taken as________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A repelling groyne is aligned________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A land is known as waterlogged_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A river bend characterized by silting_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A runoff river plant is____________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A runoff river plant_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A hyetograph is a graphical representation of___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The maximum average depth due to one day storm over an area of 100 km2 is 100 mm. Depth-Area-Duration (DAD. curves indicate that for the same area of 100 km2 the maximum average depth for a 3 hour storm will be__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The most suitable chemical which can be applied to the water surface for reducing evaporation is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A 6 hours storm had 4 cm of rainfall and the resulting runoff was 2 cm. If
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The stage of river carrying a discharge of Q m7sec at a point is 10 m and slope of water surface is (1/4000). The discharge of a flood at the same point and same stage of 10 m with a water surface slope of(l/1000) will be________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts