Theory of Structures Mcqs

Q.  A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is________________?

a. 200 mm
b. 250 mm
c. 300 mm
d. 400 mm


ANSWER: See Answer
 
No explanation is available for this question!
MCQs:  The forces acting on the bar as shown in the given figure introduce________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The yield moment of a cross section is defined as the moment that will just produce the yield stress in_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A road of uniform cross-section A and length L force P. The Young’s Modulus E of the material, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The forces in the members of simple trusses, may be analysed by________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  P = / L² is the equation for Euler’s crippling load if_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The ratio of the stresses produced by a suddenly applied load and by a gradually applied load on a bar, is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Slenderness ratio of a long column, is_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The horizontal thrust on the ends of a two hinged semicircular arch of radius carrying_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  A shaft subjected to a bending moment M and a torque T, experiences__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For calculating the allowable stress of long columns known as_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  P=4²EI/L² is the equation of Euler’s crippling load if________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Pick up the correct statement from the following_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to___________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  inertia of a rectangular section of width and depth about an axis passing The moment of through C.G. and parallel to its width is_______________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  For the close coil helical spring of the maximum deflection is__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  The purpose of providing fillet in a rail section is to_________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  52 kg rails are mostly used in__________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts
MCQs:  Head width of 52 kg rail section is________________?
Category: Civil Engineering Mcqs,   Published by: T-Code Scripts